Show garp database, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 677
AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs
677
SHOW GARP DATABASE
Syntax
show garp=gvrp db|database
Parameters
garp
Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the internal database
for the GARP application. Each attribute is represented by a GID index
within the GARP application.
GARP Application
GID Index
Attribute
Used
Example
The following command displays the database for all GARP applications:
show garp=gvrp database
AlliedWare Plus
Command
Syntax
show gvrp configuration
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Command
Available
AlliedWare Plus