Allied Telesis AT-S63 - Manual (Page 774)

Chapter 40: Virtual Router Redundancy Protocol (VRRP) Commands
774 Section VII: Internet Protocol Routing
DELETE VRRP IPADDRESS
Syntax
delete vrrp= vrid ipaddress= ipaddress
Parameters
vrrp Specifies the ID of the virtual router, a number
between 1 and 255.
ipaddress Specifies a secondary IP address to be deleted from
the group of IP addresses backed up by the specified
virtual router.
Description
This command deletes a secondary IP address from the group of IP
addresses backed up by the specified virtual router.
Example
This example deletes the IP address 205.42.19.162 from the group of IP
addresses that are backed up by the virtual router whose VRID is 34:
delete vrrp=34 ipaddress=205.42.19.162
AlliedWare Plus
Command
Syntax
router vrrp vrid
no interface ipaddress
Modes
For the ROUTER VRRP command:
Configure mode
For the NO INTERFACE command:
Router mode
Description
These AlliedWare Plus commands are equivalent to the standard
command.
Command
Available
AlliedWare Plus