Enable http server, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 837
Advertising
AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security
837
ENABLE HTTP SERVER
Syntax
enable http server
Parameters
None.
Description
This command activates the web server on the switch. The web server is
used to manage the unit with a web browser on a remote workstation. To
view the current status of the web server, see “SHOW HTTP SERVER” on
page 844. The default setting for the web server is enabled.
Example
The following command activates the web server:
enable http server
AlliedWare Plus
Command
Syntax
service http
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# service http
Command
Available
AlliedWare Plus
Advertising