Allied Telesis AT-S63 User Manual
Page 94
Advertising
Chapter 3: Basic Switch Commands
94
Section I: Basic Operations
Examples
The following command displays all the switch parameter settings that
have been changed from their default values:
show config dynamic
The following command displays the non-default parameter settings for
IGMP snooping:
show config dynamic=igmpsnoop
SSL
Secure Sockets Layer protocol
STP
Spanning Tree, Rapid Spanning, and Multiple
Spanning Tree protocols
SWITCH
Switch console timer, console startup mode,
serial port baud rate, Telnet server
SYSTEM
Administrator name, switch name, and switch
location
VLAN
Port-based and tagged VLANs, and multiple
VLAN modes
WEBSERV
Web server
Table 3. Module Variable (Continued)
Variable
Description
Advertising