Allied Telesis AT-S63 - Manual (Page 38)

Chapter 1: Overview
38 Section I: Basic Operations
In some cases, you might find that you have to use commands in different
modes to complete a management function. Creating new VLANs is an
example of this because you first have to go to the VLAN Configuration
mode to create the VLANs and then to the Port Interface mode to
designate their ports.
The modes, their command line prompts, and their functions are listed in
Table 1.
Table 1. AlliedWare Plus Modes
Mode Prompt Function
User Executive Mode awplus>  Display the switch settings.
 List the files in the file system.
 Ping remote systems.
Privileged Executive Mode awplus#  Display the switch settings
 List the files in the file system
 Ping remote systems
 Set the date and time
 Save the current configuration
 Download new versions of the
AT-S63 Management Software
 Restore the default settings
 Rename files in the file system
 Reset the switch
Configure Terminal Mode (config)#  Create classifiers and access
control lists
 Create encryption keys for remote
HTTPS and SSH management
 Activate and deactivate 802.1x
port-based network access control
 Assign a name to the switch
 Configure IGMP snooping
 Set the MAC address table aging
timer
 Enter static MAC addresses
 Specify the IP address of a SNTP
server
 Configure the RADIUS client
 Set the console timer