Allied Telesis AT-S63 - Manual (Page 420)

Chapter 21: Quality of Service (QoS) Commands
420 Section II: Advanced Operations
set to No, which is the default, the packets retain their preexisting ToS
priority level.
 Classifier List - The classifiers assigned to the policy.
 Parent Traffic Class ID - The ID number of the traffic class to which the
flow group is assigned. A flow group can belong to only one traffic
class at a time.
 Is Active - The status of the flow group. If the flow group is part of a
QoS policy that is assigned to one or more ports, the flow group is
deemed active. If the flow group has not been assigned to a policy or if
the policy has not been assigned to any ports, the flow group is
considered inactive.
For further information about the parameters, refer to “CREATE QOS
FLOWGROUP” on page 377.
Examples
This command displays all of the flow groups:
show qos flowgroup
This command displays flow group 12:
show qos flowgroup=12
AlliedWare Plus
Command
Syntax
show class-map [ id_number ]
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Examples
This command displays the details of all the flow groups:
awplus# show class-map
This command displays the flow group with the ID number 270:
awplus# show class-map 270