Disable igmpsnooping, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 468
Advertising
Chapter 25: Internet Group Management Protocol (IGMP) Snooping Commands
468
Section III: Snooping Protocols
DISABLE IGMPSNOOPING
Syntax
disable igmpsnooping
Parameters
None.
Description
This command deactivates IGMP snooping on the switch. This command
also removes IGMP querier from its VLAN assignments.
Example
The following command deactivates IGMP snooping:
disable igmpsnooping
Equivalent Command
set ip igmp snoopingstatus=disabled
For information, refer to “SET IP IGMP” on page 470.
AlliedWare Plus
Command
Syntax
no ip igmp snooping
Mode
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no ip igmp snooping
Command
Available
AlliedWare Plus
Advertising