Allied Telesis AT-S63 - Manual (Page 829)

AT-S63 Management Software Command Line User’s Guide
Section VIII: Port Security 829
Figure 92. Authenticator Port Information
Figure 93 illustrates the information displayed for a supplicant port. For an
explanation of the parameters, refer to “SET PORTACCESS|PORTAUTH
PORT ROLE=SUPPLICANT” on page 821.
Figure 93. Supplicant Port Information
Examples
This command displays the configuration settings and the status of all the
authenticator ports and the supplicant ports:
show portaccess port=all
Port 1
PAE Type.................. Authenticator
Supplicant Mode........... Single
AuthControlPortControl.... Auto
quietPeriod............... 60
txPeriod.................. 30
suppTimeout............... 30
serverTimeout............. 30
maxReq.................... 2
reAuthPeriod.............. 3600
reAuthEnabled............. Enabled
vlanAssignment............ Enabled
secureVlan................ On
guestVlan................. None (VID=0)
adminControlDirection..... Both
piggyBack................. Disabled
Attached Supplicant(s)
MAC Address..................... -
Authenticator PAE State......... Connecting
Port Status..................... Unauthorized
Backend Authenticator State..... Initialize
Port 5
PAE Type.................. Supplicant
heldPeriod...................... 60
authPeriod...................... 30
startPeriod..................... 30
maxStart........................ 3
Supplicant PAE State............ Connecting