Allied Telesis AT-S63 - Manual (Page 295)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 295
You can upload the AT-S63 image file from the master switch to more than
one switch at a time. The following command uploads the image file to
switches 4, 8, and 15:
upload method=remoteswitch srcfile=appblock
switchlist=4,8,15
The following command uploads the switch active boot configuration file
from the master switch to switch 11:
upload method=remoteswitch srcfile=switchcfg switchlist=11
Caution
After receiving the configuration file the switch resets and initializes
the software. The entire process can take a minute or so to
complete. Do not interrupt the process by resetting or power cycling
the switch. Some network traffic may be lost during the process.
The following command uploads the configuration file “sales_switches.cfg”
from a master switch to switch 4:
upload method=remoteswitch srcfile=sales_switches.cfg
switchlist=4
Caution
After receiving the configuration file the switch resets and initializes
the software. The entire process can take a minute or so to
complete. Do not interrupt the process by resetting or power cycling
the switch. Some network traffic may be lost during the process.