Allied Telesis AT-S63 User Manual
Page 497
Advertising
AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols
497
Examples
The following command displays the current MLD parameter settings:
show ipv6 mldsnooping
The following command displays a list of active host nodes connected to
the switch:
show ipv6 mldsnooping hostlist
The following command displays a list of active multicast routers:
show ipv6 mldsnooping routerlist
Equivalent Command
show mldsnooping
For information, see “SHOW MLDSNOOPING” on page 492.
Advertising