Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 670
Advertising
Chapter 35: GARP VLAN Registration Protocol Commands
670
Section VI: Virtual LANs
AlliedWare Plus
Command
Syntax
gvrp registration normal|none
Mode
Port Interface mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example configures ports 5 and 6 to participate in GVRP:
awplus> enable
awplus# configure terminal
awplus(config)# interface 5,6
awplus(config-if)# gvrp registration normal
This example configures port 20 to not participate in GVRP:
awplus> enable
awplus# configure terminal
awplus(config)# interface 20
awplus(config-if)# gvrp registration none
Advertising