Exit, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 55
Advertising
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Features
55
EXIT
Syntax
exit
Parameters
None.
Description
This command ends a management session. If you are managing a slave
switch in an enhanced stack, the command returns you to the master
switch from where you started the management session.
Example
The following command ends the current management session:
exit
Equivalent Commands
logoff
logout
quit
For information, see “LOGOFF, LOGOUT and QUIT” on page 57.
AlliedWare Plus
Command
Syntax
quit
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus# quit
Command
Available
AlliedWare Plus
Advertising