Allied Telesis AT-S63 - Manual (Page 665)

AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs 665
or
no gvrp dynamic-vlan-creation
Mode
Configure mode
Description
These AlliedWare Plus commands are identical to the standard command.
Example
This example disables GVRP:
awplus> enable
awplus# configure terminal
awplus(config)# no gvrp enable
This example disables GIP:
awplus> enable
awplus# configure terminal
awplus(config)# gvrp applicant state normal
This example disables GIP:
awplus> enable
awplus# configure terminal
awplus(config)# no gvrp dynamic-vlan-creation