Show garp, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 673
Advertising
AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs
673
SHOW GARP
Syntax
show garp=gvrp
Parameter
garp
Specifies the GARP application to display. GVRP is
the only GARP application supported by the AT-9400
Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the current values for the following GARP
application parameters:
GARP application protocol
GVRP status
GVRP GIP status
GVRP Join Time
GVRP Leave Time
GVRP Leaveall Time
Port information
Mode
Example
The following command displays GVRP information:
show garp=gvrp
AlliedWare Plus
Command
Syntax
show gvrp timer
Modes
User Exec mode and Privileged Exec mode
Command
Available
AlliedWare Plus
Advertising