Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 755
Advertising
AT-S63 Management Software Command Line User’s Guide
Section VII: Internet Protocol Routing
755
Examples
This command displays the IPv4 packet routes on the switch:
show ip route
This command displays general routing information:
show ip route general
This command displays both the routes and the general routing
information:
show ip route full
AlliedWare Plus
Command
Syntax
show ip route
Modes
User Exec mode and Privileged Exec mode
Description
This command is equivalent to entering the standard SHOW IP ROUTE
command without any of the parameters.
Example
awplus# show ip route
Advertising