Allied Telesis AT-S63 - Manual (Page 469)

AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols 469
ENABLE IGMPSNOOPING
Syntax
enable igmpsnooping
Parameters
None.
Description
This command activates IGMP snooping on the switch.
Example
The following command activates IGMP snooping:
enable igmpsnooping
Equivalent Command
set ip igmp snoopingstatus=enabled
For information, refer to “SET IP IGMP” on page 470.
AlliedWare Plus
Command
Syntax
ip igmp snooping
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# ip igmp snooping
Command
Available
AlliedWare Plus