Show snmpv3 user, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 568
Chapter 30: SNMPv3 Commands
568
Section IV: SNMPv3
SHOW SNMPV3 USER
Syntax
show snmpv3 user[=
user
]
Parameters
user
Specifies the name of an SNMPv3 user, up to 32
alphanumeric characters.
Description
This command displays SNMPv3 User Table entries. You can display one
or all of the table entries.
Examples
The following command displays all of the SNMPv3 User Table entries:
show snmpv3 user
The following command displays the SNMPv3 User Table entry for a user
name of Robert:
show snmpv3 user=Robert
AlliedWare Plus
Command
Syntax
show snmp-server user
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command displays all of the entries in the SNMPv3
User Table. You cannot specify an individual entry as you can with the
standard command.
Example
awplus# show snmp-server user
Command
Available
AlliedWare Plus