Delete radiusserver, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 886
Chapter 48: TACACS+ and RADIUS Commands
886
Section IX: Management Security
DELETE RADIUSSERVER
Syntax
delete radiusserver server|ipaddress=
ipaddress
Parameter
server or
Specifies the IP address of a RADIUS server to be deleted
ipaddress
from the management software. The parameters are
equivalent.
Description
This command deletes the IP address of a RADIUS server from the
management software.
Example
The following command deletes the RADIUS server with the IP address
149.245.22.22:
delete radiusserver ipaddress=149.245.22.22
AlliedWare Plus
Command
Syntax
no radius-server host
ipaddress
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example removes the RADIUS server with the IP address
122.34.122.47:
awplus> enable
awplus# configure terminal
awplus(config)# no radius-server host 122.34.122.47
Command
Available
AlliedWare Plus