Allied Telesis AT-S63 - Manual (Page 777)

AT-S63 Management Software Command Line User’s Guide
Section VII: Internet Protocol Routing 777
DESTROY VRRP
Syntax
destroy vrrp=[ vrid |all]
Parameters
vrrp Specifies the ID of the virtual router. The options are:
vrid Specifies the ID of a single virtual router,
a number between 1 and 255.
all Specifies that the switch be removed
from all the virtual routers in which it
participates.
Note
To destroy a virtual router completely on the LAN, you must destroy
it on all the switches participating in it.
Description
This command removes the switch from the group that forms the specified
VRRP virtual router.
Example
This command stops the switch from participating in virtual router 32:
destroy vrrp=32
AlliedWare Plus
Command
Syntax
router vrrp vrid
no virtual-ip
Modes
For the ROUTER VRRP command:
Configure mode
For the NO VIRTUAL-IP command:
Router mode
Command
Available
AlliedWare Plus