Allied Telesis AT-S63 - Manual (Page 505)

AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols 505
ENABLE EPSRSNOOPING
Syntax
enable epsrsnooping controlvlan= vid | vlan_name
Parameter
controlvlan Specifies the control VLAN where Ethernet Protected
Switching Ring (EPSR) snooping is to be enabled. The
VLAN can be identified by its VID or name. A VLAN
name is case-sensitive. You can specify only one
control VLAN at a time with this command.
Description
This command activates EPSR snooping on a control VLAN.
Example
This command activates EPSR snooping on the control VLAN with the VID
4:
enable epsrsnooping controlvlan=4