Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 165
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations
165
The following command resets port 5:
set switch port=5 softreset
Equivalent Commands
disable switch port=
port
For information, see “DISABLE SWITCH PORT” on page 154.
disable switch port=
port
flow=pause
For information, see “DISABLE SWITCH PORT FLOW” on page 155.
enable switch port=
port
For information, see “ENABLE SWITCH PORT” on page 158.
enable switch port=
port
flow=pause
For information, see “ENABLE SWITCH PORT FLOW” on page 159.
reset switch port=
port
For information, see “RESET SWITCH PORT” on page 161.
AlliedWare Plus
Command
Syntax
To set a port’s speed:
speed auto|10mhalf|10mfull|100mhalf|100mfull|1000mfull]
To set a port’s MDI/MDIX setting:
polarity mdi|mdix
To set a port’s description:
description
description
This command does not accept spaces in the description.
To return a port’s description to the default value:
no description
To disable a port:
shutdown
To enable a port:
no shutdown