Show snmpv3 notify, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 565
AT-S63 Management Software Command Line User’s Guide
Section IV: SNMPv3
565
SHOW SNMPV3 NOTIFY
Syntax
show snmpv3 notify[=
notify
]
Parameter
notify
Specifies an SNMPv3 Notify Table entry.
Description
This command displays SNMPv3 Notify Table entries. You can display
one or all of the table entries.
Examples
The following command displays all of the SNMPv3 Notify Table entries:
show snmpv3 notify
The following command displays the SNMPv3 Notify Table entry called
“testengtrap1”:
show snmpv3 notify=testengtrap1
AlliedWare Plus
Command
Syntax
show snmp-server notify
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command displays the entire SNMPv3 Notify Table.
You cannot specify an individual entry as you can with the standard
command.
Example
awplus# show snmp-server notify
Command
Available
AlliedWare Plus