Allied Telesis AT-S63 - Manual (Page 734)

Chapter 38: Internet Protocol Version 4 Packet Routing Commands
734 Section VII: Internet Protocol Routing
AlliedWare Plus
Command
Syntax
interface Default_VLAN
ifconfig eth0
Mode
VLAN Interface mode
Description
This command can only be used to designate the VLAN1-0 interface in the
Default VLAN as the local interface. To designate another interface as the
local interface, use the standard command.
Example
This example designates the VLAN1-0 interface in the Default VLAN as
the local interface:
awplus> enable
awplus# configure terminal
awplus(config)# interface Default_VLAN
awplus(config-if)# ifconfig eth0