Allied Telesis AT-S63 - Manual (Page 500)

Chapter 28: Router Redundancy Protocol (RRP) Snooping Commands
500 Section III: Snooping Protocols
DISABLE RRPSNOOPING
Syntax
disable rrpsnooping
Parameters
None.
Description
This command disables RRP snooping. This is the default setting.
Example
The following command disables RRP snooping:
disable rrpsnooping
AlliedWare Plus
Command
Syntax
no ip rrp snooping
Modes
Configure mode
Description
This AlliedWare Plus command is equivalent to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no ip rrp snooping
Command
Available
AlliedWare Plus