Allied Telesis AT-S63 - Manual (Page 615)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 615
Description
This AlliedWare Plus command has the following rules and restrictions:
 This command differs from the CREATE MSTP MSTIID command in
that it allows you to assign a priority number to a new MSTI. The
priority number is applied to all of the ports that are members of the
associated VLANs. You can specify only one priority number. For the
priority values, refer to “SET MSTP PORT” on page 629. This
parameter is optional.
 The VLAN associations are required with this command. They are
optional with the CREATE MSTP command.
Example
These commands create a new multiple spanning tree instance that has
the ID 5. There are two VLANs associated with the instance. The VIDs are
11 and 21. The priority value of the MTSI is 64 (increment 4):
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree mst configuration
awplus(config-mst)# instance 5 11,21 4