Allied Telesis AT-S63 - Manual (Page 637)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 637
The MSTI parameter displays the following information for each spanning
tree instance (excluding the CIST) on the switch:
 MSTI ID
 MSTI priority
 Regional root ID
 Path cost
 Associated VLANs
The CIST parameter displays the following CIST information:
 CIST priority value
 Root ID
 Root path cots
 Regional root ID
 Regional root path cost
 Associated VLANs
The MSTIVLANASSOC parameter displays the VLAN to MSTI
associations.
Examples
This command displays basic MSTP operating information:
show mstp
This command displays the MSTP state of Port 4:
show mstp portstate=4
This command displays the configuration of Port 5 in MSTI 2:
show mstp portconfig=5 stpid=2
This command displays the CIST information:
show mstp cist
This command displays the VLAN associations:
show mstp mstivlanassoc