Allied Telesis AT-S63 - Manual (Page 456)

Chapter 24: Power Over Ethernet Commands
456 Section II: Advanced Operations
DISABLE POE PORT
Syntax
disable poe port= port
Parameters
port Specifies a port. You can configure more than one port
at a time. For instructions on how to enter port
numbers, refer to “Port Numbers in Commands” on
page 48.
Description
This command disables PoE on a port. The default setting for PoE on a
port is enabled. Ports provide standard Ethernet connectivity even when
PoE is disabled.
Examples
This command disables PoE on ports 5 and 7:
disable poe port=5,7