Show snmpv3 access, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 562
Chapter 30: SNMPv3 Commands
562
Section IV: SNMPv3
SHOW SNMPV3 ACCESS
Syntax
show snmpv3 access[=
access
]
Parameter
access
Specifies an SNMPv3 Access Table entry.
Description
This command displays the SNMPv3 Access Table. You can display one
or all of the table entries.
Examples
The following command displays the SNMPv3 Access Table entry called
“production.”
show snmpv3 access=production
The following command displays all of the SNMPv3 Access Table entries:
show snmpv3 access
AlliedWare Plus
Command
Syntax
show snmp-server group
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command displays the entire SNMPv3 Access
Table. This command differs from the standard command in that it uses
the keyword GROUP instead of ACCESS and that it does not let you
display individual entries.
Example
awplus# show snmp-server group
Command
Available
AlliedWare Plus