Notice, Regarding this manual, Warning – Yokogawa GC8000 Process Gas Chromatograph User Manual

Page 2: Caution

Advertising
background image

i

IM 11B08A01-01E

Notice

Regarding This Manual

• This Manual should be passed on to the end user.
• Read this manual carefully and fully understand how to operate this product before you start

operation.

• All rights reserved. No part of this manual may be reproduced in any form without

Yokogawa’s written permission.

• The contents of this manual are subject to change without prior notice.
• Great effort has been made to ensure that the descriptions in this Manual are correct.

However, if you notice any error or inconsistency, please inform Yokogawa Electric
Corporation.

Regarding Protection, Safety, and Prohibition Against Unauthorized

Modifi cation

• For the protection and safe use of the product and the system controlled by it, be sure to

follow the safety instructions described in this manual. Safety is not guaranteed if you do not
follow these instructions.

• The following safety symbol marks are used on the product concerned or in this Manual:

WARNING

A WARNING sign denotes a hazard. It calls attention to a procedure, practice, condition or the
like, which, if not correctly performed or adhered to, could result in injury or death of personnel.

CAUTION

A CAUTION sign denotes a hazard. It calls attention to a procedure, practice, condition or the
like, which, if not correctly performed or adhered to, could result in damage to or destruction of
part or all of the product.

IMPORTANT

Indicates that operating the hardware or software in this manner may damage it or lead to system
failure.

NOTE

Draws attention to information essential for understanding the operation and features.

TIP

Gives information that complements the present topic.

See

Also

Gives reference locations for further information on the topic.

Protective ground terminal:

In order to provide protection against electrical shock in case of a fault. This symbol indicates that
the terminal must be connected to ground prior to operation of equipment.

Function ground terminal:

In order to provide protection against noise. This symbol indicates that the terminal must be
connected to ground prior to operation of equipment.

Media No. IM 11B08A01-01E

2nd Edition : May 2012 (YK)

All Rights Reserved Copyright © 2011, Yokogawa Electric Corporation

2nd Edition : May 11, 2012-00

Advertising