Changing the operating mode – Yokogawa GC8000 Process Gas Chromatograph User Manual

Page 209

Advertising
background image

<4. GC-HMI (touch panel)>

4-22

IM 11B08A01-01E

Figure 4.23

Changing the Active GCM

(3) GCM2 has been made active. This is indicated as the background of the GCM2 line turns

blue and the active GCM number on the caption banner shows GCM2.

Changing the operating mode

TIP

This operation is available if the user level is set to B or higher. The forced stop function is enabled only for user
level C+.

The operating mode can be changed separately for each GCM, or for all GCMs at once.

To change the operating mode of each GCM

Press the operating status change button

for the desired GCM.

The screen displays the operating status change dialog for GCM1.

2nd Edition : May 11, 2012-00

Advertising