Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 31)

<1. Overview>
1-4
IM 11B08A01-01E
M12 screw
25±5
*3: The four outer holes are used
for
installation.
The height of M12 screw
(prepared by user) is 25 ±5 mm
from the floor.
*4: Required clearance needed for wiring.
(580) 400 300
590
(1280)
11
00
20
580 430
560
375
69
700
A
1900
(1704) 40 500
22.5
300
(430)
(800)
(190) (580)
Large isothermal oven
Analyzer base sampling
unit (GCSMP) or base
Liquid-sample
valve (LSV) *1
Steam drain outlet *1
Rc1/4 or 1/4NPT
Steam inlet *1
Rc1/4 or 1/4NPT
Type 1 (Self-standing)
Inlet/outlet for sample gas,
standard gas and others
Rc1/4 or 1/4NPT
Holes for installation
4-ø15 *3
(85)
(85)
36
Weight: approx. 140 kg
Protection system *1
*4
(430)
Operation panel *1
Grounding wiring
(100 Ω or less)
Connection to electronics section *2
Wiring connection *2
Air outlet for stream swiching valve *1
6 mm or 1/4” tube
Purging air inlet
Rc1/4 or 1/4NPT
Vent for purging air
Inlet/outlet for sample gas, carrier gases, etc.
6 mm or 1/4” tube
Unit: mm
Pressure gauge *1
Control unit
*1: It depends on specifications.
*2: Wiring connections are shown in
right
figures.
View A
Vent header *1
(connection
Rc1/2 or
1/2NPT)
<Maintenance space>
(62)
28
28
35
b
(62)
36
36
125
125
For TIIS (wiring connection: G3/4) For FM-X (wiring connection: 3/4NPT)
For FM-Y (wiring connection: 3/4NPT)
For ATEX, IECEx (wiring connection: M25x1.5)
Connection 3/4NPT
Connection
G3/4 Connection G3/4
Connection 3/4NPT
Connection M25x1.5
For ATEX, IECEx (wiring connection: G3/4 or 3/4NPT)
Cable gland
Sealing fitting
(as accessories)
(for Ethenet cable)
Connection 3/4NPT
Sealing fitting
(as accessories)
(for Ethenet cable)
Cable gland
Cable gland (as accessories)
For TIIS (wiring connection: 3/4NPT)
Connection
3/4NPT
Cable gland (as accessories)
Connection a
Connector (as accessories)
Connector (as accessories)
Connector
(as accessories)
Wiring
connection a b
G3/4 31
3/4NPT 29
2nd Edition : May 11, 2012-00