Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 347)

<5. EtherLCD>
5-96
IM 11B08A01-01E
Display Item Name Set Lower Limit Upper Limit Unit Remarks
Period # Period script Number 1 64
GCM Number ○ 0 6
Auto Start ○ * Not done (not executable)
Done (executable)
Exec Interval ○ Date
Hour
Minute
Second
Ana end
Interval (Date) ○ 1 31 Date When not selected by Cycle
Time Unit, please display with
asterisk. However, leave internal
data as they are.
Interval (Hour) ○ 1 148 Hour
Interval
(Minute)
○ 1 1440 Minute
Interval
(Second)
○ 1 3600 Second
Exec SYS
Number
○ 1 6 Only SYS numbers belonging to
relevant GCM can be selected.
When Ana end is not selected
in the Cycle Time Unit, display *
(asterisk).
* When Exec interval is Ana
end, the relevant period
script is executed at the time
of Ana end for the specifi ed
SYS number.
*: The settings are valid after rebooting or turning off/on its power.
 User Program Delete Screen (Period script)
Press F3 (Delete).
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5 User Program Delete
Period # 1
>
- User Program Delete Not deleted
Menu Main Period#
F1 F2 F3 F4 F5 F6
Figure 5.108 Example of User Program Delete (Period script) screen
F1 (Menu): Displays the Table menu screen.
F2 (Main): Displays the User Programming screen (Period script).
F6 (Period #): Specifi es a Period script number.
• The operation accepts user level above C only.
• When Delete is selected in the User Program Delete, the relevant period script fi le is
deleted. When a script is deleted, the auto start of the script is automatically changed to NA.
Any period script in the status Enable cannot be deleted (an error message is displayed).
• When the execution status is Enable and the user program is about to be deleted, the error
message “No execution because of executing” is displayed.
• Even when the user program is deleted, the script fi le in the SD card is not deleted.
However, the script on the user program is deleted.
2nd Edition : May 11, 2012-00