Yokogawa GC8000 Process Gas Chromatograph User Manual
Page 294
<5. EtherLCD>
5-43
IM 11B08A01-01E
F1 (Menu):
Displays the Table Menu screen.
F5 (Oven #): Specifi es an oven number.
F6 (Det #):
Specifi es a detector number.
TIP
• The oven numbers set to Not provided on the Temperature Control Set cannot be selected.
• The detector numbers set to Not provided on the Detector Set screen cannot be selected.
• The initial screen displays the smallest oven number among those assigned to isothermal
ovens on the Temperature Control Set.
Display Item
Name
Set Lower Limit Upper Limit
Unit
Remarks
Oven #
Oven number
1
3
Det #
Detector number
1
2
Carrier gas
number
Carrier gas number
---
1-1
1-2
2-1
2-2
3-1
3-2
* --- indicates not used.
Vent-D fl ow
rate
○
Alpanumeric: 10 characters
* The detector type is
displayed.
TCD/FID/FID-MC/FPD
Detector type
None
TCD
FID
FID-MC
FPD
Vent-REF
○
Alpanumeric: 10 characters
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5
Operating Parameters
(4/8)
Oven #
1 Vent # 1
>
- Carrier gas number - - -
- Vent type - - -
- Vent fl owrate
Menu
Oven#
Vent#
F1
F2
F3
F4
F5
F6
Figure 5.56
Example of the operating parameters screen (4/8)
F1 (Menu):
Displays the Table Menu screen.
F5 (Oven #): Specifi es an oven number.
F6 (Vent #):
Specifi es a vent number.
TIP
• The oven numbers set to Not provided on the Temperature Control Set cannot be selected.
• Only carrier gas numbers for which a gas type is set on the Operation Parameters screen (1/8) can be
selected.
2nd Edition : May 11, 2012-00
5