Yokogawa GC8000 Process Gas Chromatograph User Manual
Page 333
<5. EtherLCD>
5-82
IM 11B08A01-01E
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5
D/O Setup
Slot # 1 DO # 1
>
- Process assign Stream
- Stream 1 (GCM 1)
Menu
Status
Slot#
DO#
F1
F2
F3
F4
F5
F6
Figure 5.91
Example of D/O setup screen (setting the Process assign to stream)
• The GCM number displayed on the screen cannot be set.
• When an Over limit value is set as the stream, “Over limit” is displayed in the bottom line and
the set value is not shown.
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5
D/O Setup
Slot # 1 DO # 1
>
- Process assign Operation mode
- GCM number 1
- Operation mode Stop
Menu
Status
Slot#
DO#
F1
F2
F3
F4
F5
F6
Figure 5.92
Example of D/O setup screen (setting the Process assign to 0peration mode)
• When an Over limit value is set as a GCM number, “Over limit” is displayed in the bottom
line and the set value is not shown.
• Warming up time for the currently operated stream is not included in case of Run.
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5
D/O Setup
Slot # 1 DO # 1
>
- Process assign Alarm
- GCM number 1
- Alarm level 1 AAAAAAA
- Alarm level 2 AAAAAAA
- Composition Alarm
AAAAAAA
Menu
Status
Slot#
DO#
F1
F2
F3
F4
F5
F6
Figure 5.93
Example of D/O setup screen (setting the Process assign to Alarm)
2nd Edition : May 11, 2012-00