Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 254)

<5. EtherLCD>
5-3
IM 11B08A01-01E
5.1 User Level Switching
Before conducting any settings, the user level requires to be changed.
NOTE
The user level settings for the Analyzer Operation Data Display and EtherLCD are independent
and need to be set separately.
Press among menu keys.
If is pressed when the current user level is A (default), the screen shown in Figure 5.2 is
displayed.
1 1 / 1 1 / 2 2
1 5 : 1 5 : 4 5 User Level Switching
Password * * * *
F1 F2 F3 F4 F5 F6
Figure 5.2 User level switching screen (when the current level is A)
This screen is displayed in remote mode.
A four-digit numeric password must be entered.
(Press key to complete.)
(1) When the user level B password (1192) is entered - The user level is set to B.
(2) When the user level C password (1603) is entered - The user level is set to C.
When is pressed after entering a password with numeric keys, the following screen is
displayed.
Table 5.1 User levels and authorities
User level Authorities Password
A Not required (default)
B 1192
C 1603
C+ 1702
If the user level is other than A, the screen shown in Figure 5.3 is displayed. This example shows
the case where the current user level is C.
2nd Edition : May 11, 2012-00
5