Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 249)

<4. GC-HMI (touch panel)>
4-62
IM 11B08A01-01E
Pressing the alarm status button on the lower left of the screen causes a transition to the alarm
status screen.
The fi gure in the column of “GCM” indicates the number of GC module to be occurred the alarm.
The brank means the entire hardware alarms are occurred.
Pressing the table scroll button causes scrolling through the table display area.
Pressing the alarm details button displays the alarm details screen. See 4.7.3 Alarm Details.
4.7.2 Alarm History Screen
Screen components are as shown below.
F0483.ai
GCM tab
Table scroll button
Alarm details
Alarm history Clear alarm history
Figure 4.83
Pressing the alarm history button on the lower left of the screen causes a transition to the alarm
history screen.
The fi gure in the column of “GCM” indicates the number of GC module to be occurred the alarm.
The brank means the entire hardware alarms have been occurred.
Pressing the table scroll button causes scrolling through table display area.
Pressing the clear alarm history button erases the alarm history. This operation is available if the
user level is set to B or higher.
Pressing the alarm details button displays the alarm details screen. See 4.7.3 Alarm Details.
2nd Edition : May 11, 2012-00