Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 225)

<4. GC-HMI (touch panel)>
4-38
IM 11B08A01-01E
Figure 4.48
f. Peak Tracking
Enable or disable peak tracking for the SYS assigned to the active GCM. Do this by selecting ON
or OFF.
TIP
• This operation is available if the user level is set to C or higher.
• Only the SYS number assigned to the active GCM is selectable.
Figure 4.49
2nd Edition : May 11, 2012-00