Yokogawa GC8000 Process Gas Chromatograph User Manual

Page 246

Advertising
background image

<4. GC-HMI (touch panel)>

4-59

IM 11B08A01-01E

Figure 4.79

Page 2

(1) Time

Axis

Range

Select the horizontal axis (i.e., time axis) of the graph from the radio buttons: Auto, Man.
(Start-End), Man. (Time Span), or Man. (Ana. Times).

• Man.

(Start-End)

Start Time:

Press the ## button and select the analysis start time (the time to
start drawing a graph) from the displayed values.

End Time:

Press the ## button and select the analysis end time (the time to
end drawing a graph) from the displayed values.

Note: The start time must be earlier than the end time.

• Man. (Time Span)

End Time:

Press the ## button and select the analysis end time (the time to
end drawing a graph) from the displayed values.

Time (Hour):

Press the ## button and select from the range of 1 to 72 (hours).

• Man.

(Ana.

Times)

End Time:

Press the ## button and select the analysis end time (the time to
end drawing a graph) from the displayed values.

Ana. Times

Press the ## button and select from the range of 1 to 250 (analysis
times).

(2) Vert.

Axis

Scale

Select the vertical scale from the radio buttons: Auto, Man., or Man. (Center Value).

• Man:
Set the Max. Value and Min. Value.
The setting ranges are as follows:

Max. Value: 0 to 12000, Min. Value: –2000 to 10000

TIP

The upper limit must be greater than the lower limit.

2nd Edition : May 11, 2012-00

4

Advertising