Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 235)

<4. GC-HMI (touch panel)>
4-48
IM 11B08A01-01E
Figure 4.63
(3) The mark settings include those listed below, which can be set for each graph to be
displayed.
Peak ON/OFF: Enable or disable the check mark to show or hide, respectively, the mark.
Gate ON/OFF: Enable or disable the check mark to show or hide, respectively, the mark.
Start Mark: Enable or disable the check mark to show or hide, respectively, the mark.
(4) Items that can be displayed as additional information include those listed below, which can
be set for each graph to be displayed.
None, Component name, Gain, Range, Std. Conc., and (Relative) Peak No.
TIP
The mark settings are not available if Temperature or Pressure is selected from the pen selector.
2nd Edition : May 11, 2012-00