Reload initial database – Yokogawa GC8000 Process Gas Chromatograph User Manual

Page 202

Advertising
background image

<4. GC-HMI (touch panel)>

4-15

IM 11B08A01-01E

4.1.3 GC8000

Setting

This section describes the GC8000 Setting of the setting screen.

Figure 4.15

GC8000 Setting

Reload Initial Database

When the parameter settings is changed at the EtherLCD, the icon mean DB changed blinks on
the caption banner. This is when this option reloads the initial database and matches the setting
information of GC-HMI to the setting information of the GC8000.

IMPORTANT

When you change parameters from PC or GC-HMI of another GC8000, make sure to execute
“Reload Initial Database” command in GC-HMI.

TIP

This option is available if the user level is set to B or higher.

2nd Edition : May 11, 2012-00

4

Advertising