RISCO Group LightSYS 2 - Manual (Page 100)

Installer Programming
Page 100
Quick Keys Parameter Default Range
foyer), which would have to be violated after entry in order to disarm
the system, as follows:
 In AWAY (FULL ARM) mode behaves as an Entry Follower zone.
(see

ZZ

above
)
 In Stay (ARM) mode, the zone will be bypassed.

ZZ

I + Instant (Interior + Instant)
Usually intended for non‐exit/entry doors, window protection, shock
detection and motion detectors.
 In AWAY (FULL ARM) mode behaves as an intruder (instant) zone.
 In STAY (ARM) mode, the zone is bypassed.

ZZ

UO Trigger
For a device or zone, which if violated at any time triggers a previously
programmed utility output, and is capable of activating an external
indicator, relay, appliance, and so on.

ZZ

Day Arm
Usually assigned to an infrequently used door, such as an emergency
door or a movable skylight. Used to alert the system user if a violation
occurs during the unset period (fault by day; Intruder at night), as
follows:
 With the system armed (either AWAY or STAY), the zone acts as an
intruder zone. A violation of this zone after the system is aremd or
during the exit delay time period causes an immediate intrusion
alarm.
 With the system disarmed , a violation of this zone attempts to alert
the user by causing the POWER/ LEDs on all keypads to flash
rapidly. This directs the user to view the systemʹs trouble
indications.
 Optionally, such a violation can be reported to the Central Station as
a zone trouble. (Refer to Report Codes: Miscellaneous, page.228)

ZZ

24 Hours
Usually assigned to protect non‐movable glass, fixed skylights, and
cabinets (possibly) for shock detection systems.
A violation of such a zone causes an instant intrusion alarm, regardless
of the systemʹs state