RISCO Group LightSYS 2 - Manual (Page 197)

Installer Programming
Page 197
Quick Keys Parameter Default Range

Controls
Advance through the parameters to be controlled:

Emergency
The keypad’s emergency keys can be enabled or disabled per
keypad.
Yes: Enable the operation of the keypad’s emergency keys.
No: Disable the operation of the emergency keypad’s keys.

Multi view (Bus)
Yes: The keypad will display the status of all masked partitions.
No: The keypad will display only the status of its partition.

Exit beeps (2‐Way with bypass unit;)— Sounds beeps during
exit time in stay arming.

Serial Number : The identifying 11‐digit number of the keypad
(display only)

Function Key (2‐Way)

Disable
The keypad’s function keys can be enabled or disabled per
keypad.
Yes: Enable the operation of the keypad’s function keys.
No: Disable the operation of the keypad’s function keys.
Panic
: Sends a panic alarm to the monitoring station

M/S Listen/Talk— The system dials the Monitoring Station to
establish 2‐way communication..

UO Control 1 (2‐Way): Assign outputs that will be activated by a
long press on key 

UO Control 2 (2‐Way): Assign outputs that will be activated by a
long press on key 

UO Control 3 (2‐Way): Assign outputs that will be activated by a
long press on key 
Slim 2‐way Wireless keypad features:

Label: provide a meaningful name (see page 62 for details)

Partition assignment: (in most cases this is left as 1)

Masking : enables user / keypad authorization granularity per
partition

Controls: enables emergency, exit beeps

Serial Number

Function Key > panic , MS Listen‐talk, Disable

UO 1 – 3