RISCO Group LightSYS 2 - Manual (Page 76)

Installer Programming
Page 76
Quick Keys Parameter Default Range
 
Buzzer  Bell No Yes/No
YES: If an alarm occurs when the system is armed in the stay arm mode,
a buzzer sounds for the time defined under Buzzer At Stay (see page 73)
before the external sirens operate.
NO: An alarm in the Stay Arm mode causes sirens to operate
simultaneously.
 
Audible Jamming No Yes/No
Relates to the Jamming Time parameter, described on page 71
YES: Once the specified time is reached, the Main Panel activates any
internal sounders and sends a Report Code to the MS.
NO: Same as above, except the internal sounders do not operate.
 
Exit Beeps at Stay No Yes/No
Determines whether the system will sound beeps during exit time in stay
arming.
YES: Exit beeps will sound.
NO: Exit beeps will not sound.
 
Forced Keyswitch
Arming Yes Yes/No
YES: Keyswitch or Proximity Key arming is performed on any partition.
Any violated (not READY) zone(s) in the partition will be bypassed
automatically. The partition is then ʺforce armed,ʺ and all intact zones
are capable of producing an alarm.
NO: The partition cannot be armed until all violated (not ready) zones
are secured.