RISCO Group LightSYS 2 User Manual
Page 204
Installer Programming
Page 204
Volume
Sets the sirenʹs internal speaker Alarm volume. The volume ranges
between 0 (silent) to 9 (Max volume). After setting/changing the volume,
sound will be emitted by the internal speaker to enable evaluation of the
selected volume level
Alarm 9 (1‐9)
General alarm volume
Squawk 9 (1‐9)
Squawk sound alarm
Exit Entry 9 (1‐9)
Notification of system status in exit or entry delay.
Serial No.
The identifying 11‐digit number of the sounder (display only)
Supervision
Determines if this zone will be supervised by the system expander
according to the time defined under the timer RX Supervision (see page
71)..
Lamp Times
Specify here the sounder lamp illumination duration.
Lamp Start–Specify here the start time for the sounder lamp to be
activated.
Lamp Stop ––Specify here the stop time for the sounder lamp to be
deactivated.