RISCO Group LightSYS 2 - Manual (Page 146)

Installer Programming
Page 146
Quick Keys Parameter Default Range
MS report
Urgent
events
MS 1 Polling
State
MS 2Polling
State
MS 3 Polling
State
Do not call
N/A N/A N/A
Call 1 st Primary N/A N/A
Call 2 nd N/A Primary N/A
Call 3 rd N/A N/A Primary
Call All Primary Primary Primary
1 st Backup 2 nd Primary If (MS 1 is OK)
Secondary
else (MS#1 Fails)
Backup N/A
1 st Backup
2 nd 3rd
Primary
If (MS#1 is OK)
Secondary
else (MS#1 Fails)
Backup
If (MS#2 is OK)
Secondary
else (MS#2
Fails)
Backup
1 st Backup 3 rd
Call 2 nd
Primary Primary
If (MS#1 is OK)
Secondary
else (MS#1
Fails)
Backup
2 nd Backup 3 rd
Call 1 st
Primary Primary
If (MS#2 is OK)
Secondary
else (MS#2
Fails)
Backup
MS Polling example:
When selecting MS 1 (GPRS), MS 2 (GPRS) and split report option 1
st
Backup 2 nd (using the default primary, secondary and backup time
intervals), the report process will be as follows:
In a normal state:
Polling through the GPRS network using the GSM module will occur
every 90 seconds according to the primary time interval to MS 1 and
every 3600 seconds (1 hour) according to the secondary time interval to
MS 2.