RISCO Group LightSYS 2 User Manual
Page 131
Installer Programming
Page 131
Quick Keys
Parameter
Exit/Entry Follow
Activates the output when the selected partition(s) initiates an
Exit/Entry delay period.
Fire Trouble Follow
Activates the output when a FIRE TROUBLE is detected in the selected
partition(s).
Day (Zone) Trouble
Activates when a day zone trouble is detected in the selected
partition(s).
General Trouble Follow
Activates the output when a fault condition is detected in the selected
partition.
Stay Follow
Activates the utility output when the selected partition(s) is armed in
STAY mode.
Tamper Follow
A latched output activated when a tamper occurs in the selected
partition(s) and follows any type of tamper. The output deactivates at
tamper reset.
Disarm Follow
Activates the utility output when the selected partition(s) is disarmed.
Bell Follow
This output enables the connection of different external sounders to
different partitions. Activates the output when one of the defined
partitions is in alarm mode and the bell is triggered. It will be activated
for the programmed bell time or until the alarm is unset.
Note:
The external sounder will not generate any squawk sounds