RISCO Group LightSYS 2 User Manual

Page 157

Advertising
background image

Installer Programming

Page 157

Quick Keys

Parameter

Default

Range

 

Note:

To enable GPRS communication the SIM card has to support GPRS 
channel. 
Reporting by IP can be established through different channels. The 
optional channels depend on the hardware installed in your system. 
Select the required channel via the Configuration Software as follows: 

1. IP/GPRS:  The panel checks for the availability of the IP network. 

During regular operation mode all calls and data transmission are 
carried out using the IP network line. In the case of trouble in the IP 
network, the report is routed to the GPRS network. 

2. GPRS/IP:  The panel checks for the availability of the GPRS network. 

During regular operation mode all calls and data transmission are 
carried out using the GPRS. In the case of trouble the report is routed 
to the IP network. 

3. IP Only: The report is executed through the IP network only. 
4. GPRS Only: The report is executed through the GPRS network. 

Enter the relevant IP and Port numbers for the MS that will receive 
reports from the system. (See IP and Port



SMS 

 

Events are sent to the monitoring station using encrypted SMS messages 
(128 BIT AES encryption). Each event message contains information 
including the account number, report code, communication format, time 
of event and more. The event messages are received by RISCO Group’s 
IP/GSM Receiver Software located at the MS/ARC site. The IP/GSM 
Receiver translates the SMS messages to standard protocols used by the 
monitoring station applications (For example; contact ID).This channel 
requires that RISCO Group’s IP/GSM receiver has to be used at the MS 
side. 
Enter the relevant phone numbers for the MS that will receive reports 
from the system. (See explanation in Voice type on page 168.) 



LRT 

 

The LRT menu contains parameters for setting a system long‐range radio 
communication network, using the Location Aided Routing (LARS) 
protocol (LARS, LARS1, or LARS2) or E‐LINE protocol to facilitate 
detailed event transmission to monitoring stations. 

Advertising