RISCO Group LightSYS 2 - Manual (Page 175)

Installer Programming
Page 175
FM Call All
Yes: Parallel reporting to the Follow Me destination can be established
via both the cloud and non‐cloud channels.
No: Communication to the Follow Me destination via the non‐cloud
channels can be established only in backup mode (when LightSYS2 –
cloud connection is down)

Reporting Priority 01–05

MS First
The system first reports to all registered MSs according to internal
priority (report split) with the configured retries. Only then is a report
generated to registered FMs according to internal priority (consecutive)
with the configured retries.
This is the default value.

FM First
The system first reports to all registered FMs according to internal
priority (consecutive) with the configured retries.
Only then is a report generated to registered MSs according to internal
priority (report split) with the configured retries.

Alternately MS First 01–05
Report alternately between MS and FM destinations starting with MS,
that is: MS1FM1MS2FM2MS3…
The internal priority is used (report split to MS and consecutive to FM) to
determine next destination.
Retries are attempted as per each type specification. For example, if MS
retries is 8 and FM reties is 4, then after 4 full loops continue only with
MS destinations.

Alternately FM First 01–05
Report alternately between FM and MS destinations starting with FM,
that is. FM1MS1FM2MS2FM3…
The internal priority is used (report split to FM and consecutive to MS) to
determine next destination.
Retries are attempted as per each type specification. For example, if MS
retries is 8 and FM reties is 4, then after 4 full loops continue only with
MS destinations.