RISCO Group LightSYS 2 User Manual
Page 203
![background image](/files/858705/content/doc203.png)
Installer Programming
Page 203
2-Way WL Sounders
Label
As appropriate, rename the sounder’s label, as per the key definitions on
page 62.
Strobe
Use this menu to define parameters relating to the sounder
strobe
Control
Follow Bell
Defines the strobe operation mode.
ALWAYS OFF ‐ The strobe is deactivated.
FOLLOW BELL — The strobe is activated when the siren bell
is triggered.
FOLLOW ALARM — The strobe is activated when an alarm
occurs in the selected siren’s partitions.
Blink
40
Defines the number of times that the strobe will blink in a minute.
20 [Times/Min]
30 [Times/Min]
40 [Times/Min]
50 [Times/Min]
60 [Times/Min]
Arm Squawk
01 01‐20 (seconds)
The time that the strobe will blink when the system is armed.
Note:
If the siren’s squawk strobe is defined as NO (Refer to the add/delete
module,
page 187) this parameter will be ignored.