RISCO Group LightSYS 2 - Manual (Page 94)

Installer Programming
Page 94

Service Information
The Service Information menu enables you to insert information accessible to the systemʹs
users of the alarm company from whom the service is obtained.
System: Service Information
Quick Keys Parameter Default Range
 
Name Any 16 characters
Enables you to insert and/or edit the name of the MS from whom service
may be obtained.
 
Phone Any 16 characters
Enables you to insert and/or edit the service phone number.

Firmware Update
Note:
The firmware update menu option series is visible only if the IP or GSM module is installed.
Access and configure the parameters in the System Control menu, as follows:
System: Firmware Update
Quick Keys Parameter Default Range

Server IP firmware.riscogroup.com
Enter the IP address of the router/gateway where the upgrade file is
located.

Server Port 80
Enter the port on the router/gateway where the upgrade file is located

File Name CMD.TXT
Enter the upgrade file name. for example: /LightSYS/0UK/cpcp.bin
Please contact Customer Support services for the file name parameters

Download File
Select the communication path for the upgrade.

Via IP

Via GPRS